Correlational Research | When & How to Use

A correlational research design investigates relationships between variables without the researcher controlling or manipulating any of them.

A correlation reflects the strength and/or direction of the relationship between two (or more) variables. The direction of a correlation can be either positive or negative.

Positive correlation Both variables change in the same direction As height increases, weight also increases
Negative correlation The variables change in opposite directions As coffee consumption increases, tiredness decreases
Zero correlation There is no relationship between the variables Coffee consumption is not correlated with height

Correlational vs. experimental research

Correlational and experimental research both use quantitative methods to investigate relationships between variables. But there are important differences in data collection methods and the types of conclusions you can draw.

Correlational research Experimental research
Purpose Used to test strength of association between variables Used to test cause-and-effect relationships between variables
Variables Variables are only observed with no manipulation or intervention by researchers An independent variable is manipulated and a dependent variable is observed
Control Limited control is used, so other variables may play a role in the relationship Extraneous variables are controlled so that they can’t impact your variables of interest
Validity High external validity: you can confidently generalize your conclusions to other populations or settings High internal validity: you can confidently draw conclusions about causation

Prevent plagiarism. Run a free check.

Try for free

When to use correlational research

Correlational research is ideal for gathering data quickly from natural settings. That helps you generalize your findings to real-life situations in an externally valid way.

There are a few situations where correlational research is an appropriate choice.

To investigate non-causal relationships

You want to find out if there is an association between two variables, but you don’t expect to find a causal relationship between them.

Correlational research can provide insights into complex real-world relationships, helping researchers develop theories and make predictions.

Example
You want to know if there is any correlation between the number of children people have and which political party they vote for. You don’t think having more children causes people to vote differently—it’s more likely that both are influenced by other variables such as age, religion, ideology and socioeconomic status. But a strong correlation could be useful for making predictions about voting patterns.

To explore causal relationships between variables

You think there is a causal relationship between two variables, but it is impractical, unethical, or too costly to conduct experimental research that manipulates one of the variables.

Correlational research can provide initial indications or additional support for theories about causal relationships.

Example
You want to investigate whether greenhouse gas emissions cause global warming. It is not practically possible to do an experiment that controls global emissions over time, but through observation and analysis you can show a strong correlation that supports the theory.

To test new measurement tools

You have developed a new instrument for measuring your variable, and you need to test its reliability or validity.

Correlational research can be used to assess whether a tool consistently or accurately captures the concept it aims to measure.

Example
You develop a new scale to measure loneliness in young children based on anecdotal evidence during lockdowns. To validate this scale, you need to test whether it’s actually measuring loneliness. You collect data on loneliness using three different measures, including the new scale, and test the degrees of correlations between the different measurements. Finding high correlations means that your scale is valid.

How to collect correlational data

There are many different methods you can use in correlational research. In the social and behavioral sciences, the most common data collection methods for this type of research include surveys, observations, and secondary data.

It’s important to carefully choose and plan your methods to ensure the reliability and validity of your results. You should carefully select a representative sample so that your data reflects the population you’re interested in without research bias.

Surveys

In survey research, you can use questionnaires to measure your variables of interest. You can conduct surveys online, by mail, by phone, or in person.

Surveys are a quick, flexible way to collect standardized data from many participants, but it’s important to ensure that your questions are worded in an unbiased way and capture relevant insights.

Example
To find out if there is a relationship between vegetarianism and income, you send out a questionnaire about diet to a sample of people from different income brackets. You statistically analyze the responses to determine whether vegetarians generally have higher incomes.

Naturalistic observation

Naturalistic observation is a type of field research where you gather data about a behavior or phenomenon in its natural environment.

This method often involves recording, counting, describing, and categorizing actions and events. Naturalistic observation can include both qualitative and quantitative elements, but to assess correlation, you collect data that can be analyzed quantitatively (e.g., frequencies, durations, scales, and amounts).

Naturalistic observation lets you easily generalize your results to real world contexts, and you can study experiences that aren’t replicable in lab settings. But data analysis can be time-consuming and unpredictable, and researcher bias may skew the interpretations.

Example
To find out if there is a correlation between gender and class participation, you observe college seminars, note the frequency and duration of students’ contributions, and categorize them based on gender. You statistically analyze the data to determine whether men are more likely to speak up in class than women.

Secondary data

Instead of collecting original data, you can also use data that has already been collected for a different purpose, such as official records, polls, or previous studies.

Using secondary data is inexpensive and fast, because data collection is complete. However, the data may be unreliable, incomplete or not entirely relevant, and you have no control over the reliability or validity of the data collection procedures.

Example
To find out if working hours are related to mental health, you use official national statistics and scientific studies from several different countries to combine data on average working hours and rates of mental illness. You statistically analyze the data to see if countries that work fewer hours have better mental health outcomes.

How to analyze correlational data

After collecting data, you can statistically analyze the relationship between variables using correlation or regression analyses, or both. You can also visualize the relationships between variables with a scatterplot.

Different types of correlation coefficients and regression analyses are appropriate for your data based on their levels of measurement and distributions.

Correlation analysis

Using a correlation analysis, you can summarize the relationship between variables into a correlation coefficient: a single number that describes the strength and direction of the relationship between variables. With this number, you’ll quantify the degree of the relationship between variables.

The Pearson product-moment correlation coefficient, also known as Pearson’s r, is commonly used for assessing a linear relationship between two quantitative variables.

Correlation coefficients are usually found for two variables at a time, but you can use a multiple correlation coefficient for three or more variables.

Regression analysis

With a regression analysis, you can predict how much a change in one variable will be associated with a change in the other variable. The result is a regression equation that describes the line on a graph of your variables.

You can use this equation to predict the value of one variable based on the given value(s) of the other variable(s). It’s best to perform a regression analysis after testing for a correlation between your variables.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

Correlation and causation

It’s important to remember that correlation does not imply causation. Just because you find a correlation between two things doesn’t mean you can conclude one of them causes the other for a few reasons.

Directionality problem

If two variables are correlated, it could be because one of them is a cause and the other is an effect. But the correlational research design doesn’t allow you to infer which is which. To err on the side of caution, researchers don’t conclude causality from correlational studies.

Example
You find a positive correlation between vitamin D levels and depression: people with low vitamin D levels are more likely to have depression. But you can’t be certain about whether having low vitamin D levels causes depression, or whether having depression causes reduced intakes of vitamin D through lifestyle or appetite changes. Therefore, you can only conclude that there is a relationship between these two variables.

Third variable problem

A confounding variable is a third variable that influences other variables to make them seem causally related even though they are not. Instead, there are separate causal links between the confounder and each variable.

In correlational research, there’s limited or no researcher control over extraneous variables. Even if you statistically control for some potential confounders, there may still be other hidden variables that disguise the relationship between your study variables.

Example
You find a strong positive correlation between working hours and work-related stress: people with lower working hours report lower levels of work-related stress. However, this doesn’t prove that lower working hours causes a reduction in stress.

There are many other variables that may influence both variables, such as average income, working conditions, and job insecurity. You might statistically control for these variables, but you can’t say for certain that lower working hours reduce stress because other variables may complicate the relationship.

Although a correlational study can’t demonstrate causation on its own, it can help you develop a causal hypothesis that’s tested in controlled experiments.

Other interesting articles

If you want to know more about statistics, methodology, or research bias, make sure to check out some of our other articles with explanations and examples.

Frequently asked questions about correlational research

What is a correlation?

A correlation reflects the strength and/or direction of the association between two or more variables.

  • A positive correlation means that both variables change in the same direction.
  • A negative correlation means that the variables change in opposite directions.
  • A zero correlation means there’s no relationship between the variables.
What is correlational research?

A correlational research design investigates relationships between two variables (or more) without the researcher controlling or manipulating any of them. It’s a non-experimental type of quantitative research.

What’s the difference between correlational and experimental research?

Controlled experiments establish causality, whereas correlational studies only show associations between variables.

  • In an experimental design, you manipulate an independent variable and measure its effect on a dependent variable. Other variables are controlled so they can’t impact the results.
  • In a correlational design, you measure variables without manipulating any of them. You can test whether your variables change together, but you can’t be sure that one variable caused a change in another.

In general, correlational research is high in external validity while experimental research is high in internal validity.

How many variables are in a correlation?

A correlation is usually tested for two variables at a time, but you can test correlations between three or more variables.

What is a correlation coefficient?

A correlation coefficient is a single number that describes the strength and direction of the relationship between your variables.

Different types of correlation coefficients might be appropriate for your data based on their levels of measurement and distributions. The Pearson product-moment correlation coefficient (Pearson’s r) is commonly used to assess a linear relationship between two quantitative variables.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Bhandari, P. (2023, June 22). Correlational Research | When & How to Use. Scribbr. Retrieved January 8, 2024, from https://www.scribbr.com/methodology/correlational-research/

Is this article helpful?
Pritha Bhandari

Pritha has an academic background in English, psychology and cognitive neuroscience. As an interdisciplinary researcher, she enjoys writing articles explaining tricky research concepts for students and academics.